close

SHUNT REAKTOR

Shunt Reactors;

Reactors can be added to automatic compensation systems to compensate for excessive capacitive power. 

The most common applications of shunt reactors are those using long energy transmission and distribution cables.
To transmit energy to systems such as radio base stations and radio and TV transmitters, especially in rural areaskilometers long cable must be used. (The cables also have certain capacity values according to their type and
characteristics.) In these installations where the load level is low, the system becomes overcompensated due to the capacitive effect of the long cable. 

In this case, a continuous capacitive reactive penalty payment is encountered. Also, due to overcompensation, an increase in the mains voltage may occur and sensitive devices may be damaged.

Characteristics

  • Single or three-phase, high permeability iron core, air spacing design
  • Electrolytic copper and aluminum wound
  • Current and power required for the design and production
  • Thermal protection against overheating on each leg
  • According to the current terminals, lugs or busbar connection
  • Protection from moisture and ensuring silent work with varnish in vacuum
  • Compliance with EN 61558-1 and EN 61558-2-20 standards, TSE approved and CE marked
  • Production under ISO 9001 quality management system
  • Overcurrent pulling at the moment when the capacitors are switched on
  • The excessive increase of currents due to harmonic resonance condition and overloading of capacitors
  • Condenser breakdown in a short time
  • Loads of lines due to overcurrents, warming on wires
  • Opening the protective elements as untimely
  • Harmonics cause excessive distortion of mains voltage, therefore problems experienced in sensitive devices
  • Developments in communication systems
  • Unexplained problems and failures in electronic cards, devices and computers

To TopUp